Solar cables are suitable for the interconnection of various elements of photovoltaic systems. Suitable for fixed installation outside and inside without protection or inside pipes, ducts or similar closed systems High resistance against ozone, U.V. rays, oils and moisture
Single core cables, for photovoltaic and solar system use, elastomeric compound insulted and sheathed. Flame retardant, halogen free, and low smoke flexible cables for fixed laying.
Solar cables are suitable for the interconnection of various elements of photovoltaic systems. Suitable for fixed installation outside and inside without protection or inside pipes, ducts or similar closed systems High resistance against ozone, U.V. rays, oils and moisture
Single core cables, for photovoltaic and solar system use, elastomeric compound insulted and sheathed. Flame retardant, halogen free, and low smoke flexible cables for fixed laying.
Solar MD 14.3kWh SS4143-01
The SS4143 relies on lithium Iron-Phosphate battery for streamlined energy storage. You can use 1 to 6 batteries on the wall during the setup. The Solar MD 14.3kWh features different storage capacities according to user requirements. We can increase capacity through the parallel connection of the batteries. This will enable you to use from14.3kWh to 85.8kWh setup.
SS4143 BATTERY FEATURES
• Excellent safety• High-temperature performance• Long life cycle• High energy density• Stable discharge platform• High charge & discharge rate• Highly efficient
DATASHEET
MANUAL
🔋 Solar MD SS4160 - 16 kWh Advanced LiFePO4 Battery
Key Specifications:
Parameter
Value
Battery Type
LiFePO4 (Lithium Iron Phosphate)
Rated Capacity
16.0 kWh
Nominal Voltage
51.2 V
Voltage Range
44.8 – 55.6 VDC
Nominal Power @ 0.5C
8.0 kW
Max Charge & Discharge Current
157 A
Cycle Life @ 25°C
≥ 7000 cycles
Charging Efficiency
99%
Operating Temperature
0°C to 50°C
Weight
118 kg
Dimensions (W x D x H)
674 mm x 187 mm x 606 mm
Storage Duration
6 months @ 25°C
Certifications & Compliance:
CE / EN 55016 / IEC 61000
IEC 62619 / UN38.3 / UN3480
UL 1642 / UL 1973
Features:
Modular design (parallel scalable)
Wall or floor mounted
High energy density
Long life cycle
Stable discharge
High charge/discharge rate
Built-in Battery Management System (BMS)
CANBUS & RS485 Communication
Compatible with:
Deye
McRockage
Sunsynk
Sungrow
Goodwe
Sermatec
Huawei
BMS Functions:
Cell balancing
Overcharge/discharge protection
Temperature monitoring
SOC calculation & control
Data logging & storage
Communication via CANBUS, RS485
EMS Integration (mypower24 platform):
Real-time data & insights
Remote management
Secure communication
Integrated with Logger V2
SRNE 10kW Off-Grid Inverter.The SRNE 10kW Off-Grid Inverter is a powerful and efficient solution for powering your home or business independently of the grid. It’s designed to convert DC power from solar panels into usable AC power.
Key Features
Battery Compatibility: Supports a wide range of battery types.
Pure Sine Wave Output: Delivers clean, stable AC power.
High Power Output: Rated output of 10,000W and a peak power of 20,000W.
Protection Features: Equipped with overvoltage, undervoltage, overload, and short-circuit protection.
Remote Monitoring: Wi-Fi modules for real-time monitoring of your system’s performance
Specifications:
Inverter Output:
Rated Output Power: 10,000W
Max.Peak Power: 20,000W
Rated Output Voltage: 230Vac（single-phase L/N/PE ）
Switch Time: 10ms（typical）
Battery:
Battery Type: Li-ion / Lead-Acid / User Defined
Rated Battery Voltage: 48Vdc
Voltage Range: 40～60Vdc
Max.MPPT Charging Current: 200A
Max.Mains/Generator Charging Current: 120A
Max.Hybrid Charging Current: 200A
PV Input
Num. of MPP Trackers: 2
Max.PV array power: 5,500W + 5,500W
Max.input current: 22A + 22A
Max.Voltage of Open Circuit: 500Vdc + 500Vdc
MPPT Voltage Range: 125～425Vdc
General
Dimensions: 620*445*130mm
Weight: 27kg
Noise: <60dB
Cooling Method: Internal Fan
Warranty: 2 Years
Discover the power of the SRNE 5Kw Off Grid inverter – robust, efficient, and perfect for home use. Designed by SRNE Solar, this cutting-edge inverter features Rated Power of 5,000W and a Max. Peak Power of 10,000VA. Moreover, its single MPP tracker ensures seamless solar energy management. Furthermore, this inverter is compatible with both Li-ion and Lead-acid batteries, offering flexibility for various energy storage setups.
In spite of its impressive capabilities, the SRNE 5Kw Off Grid Inverter remains easy to use and, most importantly, safe for your home. In addition, it’s designed to deliver consistent power output throughout its lifetime.For those seeking even greater power capacity, consider the SRNE 10Kw Off Grid Inverter. Alternatively, the Luxpower 5Kw Off Grid Inverter is another excellent choice that presents similar features.
Model: HYP4850S100-H.Manufacturer: SRNE Solar.
INVERTER OUTPUT
Rated Power: 5,000W.
Max. Peak Power: 10,000VA.
Rated Output Voltage: 230Vac (L/N/PE single-phase).
Load Capacity of Motors: 4HP.
Rated AC Frequency: 50/60Hz.
Waveform: Pure sine wave.
Switch Time: 10ms (typical).
Parallel Capacity: 1-6 units (single/three phase).
BATTERY
Battery Type: Li-ion / Lead-acid and user-define.
Rated Battery Voltage: 48Vdc.
Voltage Range: 40-60Vdc.
MPPT Charging Current: 100A.
Mains/Generator Charging Current: 60A.
Hybrid Charging Current: 100A.
PV INPUT
Num. of MPP Trackers: 1.
Max. PV array power: 5,500W.
Input current: 22A.
Voltage of Open Circuit: 500Vdc.
MPPT Voltage Range: 120-450Vdc.
GENERAL
Dimensions: 446.9*350*133 mm.
Weight: 13kg.
Noise: <60dB.
Warranty: 2 years.
COMMUNICATION.
Embedded Interfaces RS485/CAN/USB/dry contact.
External Modules (Optional) Wi-Fi/GPRS.
Sunsynk 10.24kWh Lithium-ion Battery (LiFeP04)
USABLE POWER: (10.24kWh) 100% DOD
Sunsynk have produced a great storage solution to be combined with Sunsynk inverters. The battery can be expected to remain serviceable for more than 10 years with a daily cycle at room temperature (25°C). The Sunsynk Lithium ferro phosphate batteries provide excellent thermal stability and storage for peace of mind. The Sunsynk LFP battery also incorporates a self-monitoring function for the detection of any abnormalities in power storage.The Sunsynk 5.12kWh battery is an excellent quality battery with backup, excellent technical support and is ideal for solar systems and backup power.
SPECIFICATIONS
Capacity – 10.24Kwh / 200Ah / 51.2V
Standard charge current - 100A (1C)
Maximum continuous charge / discharge current - 200A (1C)
Maximum Pulse output current - 400A (1C) (Peak Inrush Current)
6000 cycles (at 25c) with 80% DoD
Modular design for system scalability
Built in BMS that protects the cells from abnormal temperature, current, voltage, Short circuit, SoC and SoH.
Communication: Sunsynk | Deye - CAN & RS485
Up to 8 Batteries in Parallel
Operating Temperature > -20 to 55 degrees celsuis. (ideally 25 degrees C) (Max Operating Temp 55 degrees)
FINISHING:
Powder coated - White/Cream
DIMENTIONS (mm):
550×160×836mm 90KG
MOUNTING:
Wall mounted - Wall Bracket Included
WARRANTY:
10 Years - (25 degrees C)Terms & Conditions apply.
DATASHEET
The Sunsynk 12kW Single Phase Inverter are designed to work with both solar panels and battery storage systems, allowing you to generate and store electricity from solar energy. Efficiently harness solar energy with the Sunsynk 12kW Single Phase Inverter, designed for seamless battery storage integration. INTERACTIVE– Easy and simple to understand display– Supporting Wi-Fi or GSM monitoring– Visual power flow screen– Smart settable 3-stage MPPT charging for optimized battery performance– Auxiliary load function– Parallel / multi-invert function grid-tied and off-gridCOMPATIBLE– Compatible with main electrical grid voltages or power generators– Compatible with wind turbines– Self-consumption and feed-in to the grid– Auto restart while AC is recovering– Auto earth bond feature (Via a relay)CONFIGURABLE– Fully programmable controller– Programmable supply priority for battery or grid– Programmable multiple operation modes: on-grid/off-grid & UPS– Configurable battery charging – current/voltage based on applications by LCD setting– Configurable AC / solar / generator charger priority by LCD settingSECURE– Overload/over-temperature/short-circuit protection– Smart battery charger design for optimized battery protection– Limiting function installed to prevent excess power overflow to the gridAPPLICATIONS– Marine (vessel power management)– Power shedding (home/office/factory)– UPS (fuel-saving systems)– Remote locations with solar and wind generators– Building sites– Military locations– Telecommunication
mprove self-consumption ratio up to 80%, reducing your electricity bill.
DC/AC ratio up to 1.3, completely suitable for double-side PV modular.
Two MPPT design, Max. efficiency of 97.6%.
User-friendly.
LCD Touch screen and buttons, easy operation.
Compatible with lithium-ion battery and lead acid battery.
Web browser and mobile App monitoring supported.
Reliable.
PV lighting protection, Anti-islanding protection, Leakage current protection etc.
Support store energy from DG when needed, ensure the system working within 7*24H.
IP65 protection degree, adapt to indoor and outdoor using.
Automatically switch from on-grid to off-grid mode within 5ms.
Zero exporting function, fast reaction within 200ms in zero export mode.
Smart.
Programmable charging and discharging schedule.
Both wind turbines and solar panels can be connected as DC input power.
Max. 16 units can be paralleled for higher system power.
Retrofitting of existing solar system to energy storage system.
Features:
100% unbalanced output, each phase Max. output up to 50% rated power.
48V low voltage battery, transformer isolation design.
6 time periods for battery charging/discharging.
Max. charging/discharging current of 240A.
Frequency droop control.
DC couple and AC couple to retrofit existing solar system.
Support storing energy from diesel generator
Battery Input Data
Battery Type: Lead-acid or Li-lon
Battery Voltage Range (V): 40-60V
Max. Charging Current (A): 240A
Max. Discharging Current (A): 240A
Charging curve: 3 Stages/Equalization
External Temperature Sensor: Optional
Charging Strategy for Lithium Battery: Self-adaption to BMS
PV String Input Data
Max. DC Input Power (W): 15600W.
PV input Voltage (V): 550V (150V-800V).
MPPT Range (V): 200-650V.
Start-up Voltage (V): 160V.
PV Input Current (A): 25A + 125.5A.
No. of MPPT Trackers: 2
No. of Strings Per MPPT Tracker: 2+1.
AC Output Data
Rated AC Output and UPS Power (W): 12000W
Max AC Output Power (W): 13200W
Peak Power(off-grid): 2 times of rated power, 10 S.
AC Output Rated Current(A): 18A
Max.AC Current(A): 27A
Max Continuous AC Pass-through(A): 50A.
Output Frequency and Voltage: 50/60Hz; 230/400Vac (Three Phase)
Grid Type: Three Phase
Current Harmonic Distortion: THD<3% (Linear load<1.5%).
Efficiency
Max. Efficiency: 97.60%
Euro Efficiency: 97.00%
MPPT Efficiency: 99.90%
Protection
PV Arc Fault Detection: Integrated (Except European Type)
PV Input Lightning Protection: Integrated
Anti-islanding Protection: Integrated
PV String Input Reverse Polarity Protection: Integrated
Insulation Resistor Detection: Integrated
Residual Current Monitoring Unit: Integrated
Output over Current Protection: Integrated
Output Shorted Protection: Integrated
Output over Voltage Protection: Integrated
We have taken the Sunsynk Hybrid Inverter to the highest level. Our new Sunsynk MAX is the most powerful low-voltage inverter in the world, achieving a maxium output power of 16kW and battery charge current of 275A.This power management tool allows the user to hit those ‘parity’ targets by managing power-flow from multiple sources such as solar, mains power (grid) and generators, and then effectively storing and releasing power as and when utilities require.
INTERACTIVE
Supporting Wi-Fi or GSM monitoring
Visual power flow screen
Parallel / multi invert function grid-tied and off-grid
COMPATIBLE
Compatible with main electrical grid voltages or power generators
Self-consumption and feed-in to the grid
Auto restart while AC is recovering
Auto earth bond feature (Via a relay)
CONFIGURABLE
Fully programmable controller
Programmable supply priority for battery or grid
Programmable multiple operation modes: on-grid/off-grid & UPS
Configurable battery charging - current/voltage based on the application
Configurable AC / solar / generator charger priority by LCD setting
SECURE
Overload/over-temperature/short-circuit protection
Smart battery charger design for optimized battery protection
Limiting function installed to prevent excess power overflow to grid
Sunsynk have produced a perfect storage solution. The module consists of Lithium ferro phosphate rechargeable batteries with 5.12kWh capacity rated at 51.2V 100Ah with a built-in battery management system.
The battery can be expected to remain serviceable for more than 10 years and this takes into consideration that it is charged and discharged once per day at room temperature (25°C).Lithium ferro phosphate batteries provide excellent thermal stability and storage. The module also incorporates a self-monitoring function for the detection of any abnormalities in power storage.
Cell Type - Lithium Ferro Phosphate (LifePO4 or LFP)
Nominal Operating Voltage - 51.2V
Nominal Capacity - 100Ah / 5.12kWh
Depth of Discharge (DoD) - 100%
Usable Capacity - 5.12kWh
Packing - 1P16S
IP Rating - IP40
Minimum Operating Voltage - 44.8V
Maximum Operating Voltage - 57.6V
Standard Charging Current - 50A
Max. Continuous Charging Current - 50A
Standard Discharging Current - 50A
Max. Continuous Discharging Current - 100A (1C, 25°C ± 2°C)
Max. Pulse Discharging Current - 200A (2C, 30S, 25°C ± 2°C SOC≥40%)
Standard Charging Method - 0.5C CC to 57.6V, CV at 57.6V till current is 0.05C
Min. Operating Temperature (no derating) - Charging: 0°C / Discharging: -20°C
Max. Operating Temperature (no derating) - Charging: 50°C / Discharging: 55°C
Operating ROH - 20% ~ 80%
Storage Temperature - -20 ~ 50°C
Self-discharging rate - ≤5% (25°C 50% SoC)
SoC @ end of product line - 40%
Insulation Resistance - >100MΩ
Voltage Difference in each module - ≤20mV
Inner Resistance of single Cell - 0.34 ± 0.05mΩ (fresh cell 30 ~ 40% SoC)
Altitude Below - 2000m
Weight - 48kg
Dimensions - 440 x 530 x 132mm (not include connector, MSD and other parts)
Expected Life @ 25°C - Greater than 10 years if used as per warranty terms
DATASHEET
This is a mid-range Hybrid Inverter that carries the same features as the larger inverters. The size is aimed at larger marine vessels and domestic premises with sufficient roof space for solar or wind power. Ideal for solar arrays ranging from 2.5kW to 4.8kW. It carries a weatherproofing rating of IP65 and is fitted with 2 x MPPT ports.
• Maximum efficiency of 97.5% with wide input range
• Double MPPT design with precise MPPT algorithm
• Natural cooling- IP65 protection
• Compact and light design for easy installation
• Transformer-less GT technology
• RS485 Wi-Fi interface
• Built-in protection features
• Built-in anti-overflow function
• 25 Years lifespan
• 5 Year Warranty
Sunsynk Datasheet
Sunsynk User Manual
Sunsynk Installer Manual
Sunsynk Warranty
The inverter has excellent efficiency and performs above 97%.
It is easy to install and has a clear touch screen where you can programme and read the system status. Added to the inverter is a Wi-FI port to allow the user to monitor the inverter via the internet.
Main Features
• 120V/240V split phase, 230V single phase• Self consumption and feed-in to the grid options• Auto re-start while AC is recovering• Programmable• Compatible to mains voltage or generator power• Overload / temperature / short circuit protection• Supports Wi-Fi monitoring• 3-Stage MPPT charging for optimal battery performance• Timing adjustable for convenient and efficient operation• On-grid, off-grid or uninterrupted power supply (UPS)
Inputs:
PV solar
AC grid power
Batteries
Generator
Output voltage – 230V AC
Continuous power – 8000W
Start-up power – 16000W
Backup power – 8000W
DC – 48V
Battery charger – 190A
Transfer time <= 10ms
Battery charger adjustable for battery bank size and type
Can charge Lead Acid and Li-ion batteries
Li-ion battery charging self-adapts to BMS
Solar Input
Max power input – 8800W
Max V DC input – 500V DC
Max current input – 18A + 18A
MPPTs – 2
Multi-core processor design and advanced MPPT control
High reliability and response speed
Multiple operating modes:
Battery only
Grid-tie only
Hybrid
Off-grid
Additional features
AC couple
6 stages time of use settings
IP65
Protections
PV input lightning protection
Anti-islanding
Insulation resistance detection
Residual current
Output short circuit
Output overvoltage
Arc detection
Certifications
NRS 097-2-1:2017, Edition 2
Grid Regulation: UL1741, IEEE1547, VDE-ARN4105
Safety Regulation: IEC62109-1&2, IEC62040-1
EMC: EN61000-6-1, EN61000-6-3, FCC 15 class B
DATASHEET
INSTALLATION MANUAL
WARRANTY
New Sunsynk Data Logger
Has Wi-Fi compatibility
Allows for remote monitoring
All inverter settings can be configured directly from the App
The logger is only compatible with the new platform, new sunsynk application (see link below)
Please note this is not compatible with the Solarman App
Does not come with the RJ45 port
The data logger is included in the packaging for all new Sunsynk inverters.
• Advanced BMS with current limiting function
• CAN Bus, fully integrates and communicates with leading Inverter brands
• Excellent high temperature performance
• High Cycle Life and Service Life
• 1C High Performance Lithium battery
• High Energy Density and conversion efficiency
• Complete with integrated Battery Management System
• Compatible with most Inverters and chargers
• Low self discharge
• Easy wall mount or shelf rack installation
• Heavy duty side handles for easy handling and mounting on the wall
• Built in protection for over-charge, over-discharge & over-temperature
SPECIFICATIONS:
Series
Lithium battery
Model and Capacity
25.9V100Ah
Total power consumption
2.59KWh
Rated Capacity
Typical:100Ah
internal Impedance
≤ 10mohm
Nominal Voltage
25.9V
Charging Voltage
29.2V
Standard discharge time
100Ah
Max.Continuous Discharge
100A
Current
Discharge Cut-Off Voltage
20.3V
Battery Weight
27KG
